3
Reference: 3FLEXI
£25.00
Category: Online Shopparts
3" flexi joint, 4" long 3" internal for 3" tubing all stainless ilok construction, best quality other sizes available, ask for details
£900.00
The Original Buell 1125 drag bike sidewinder system, built from the original jigs which Aph now own, The only drag pipe for your 1125! *built to order* *not for street use*
Buell 1125 race ecm
Reference: 1125ECM
£250.00
Category: Online Shop
Ecm with matched tune for the Buell 1125 r/cr race exhaust
£995.00
Complete exhaust system to fit Buell 1125r/cr built from the Original Buell/Ebr jigs, Aph is now the only place you can get these from! all tig welded construction and fully argon purged, massive weight saving over the stock silencer, specific ecm available or for best performance results the use u...
£385.00
Category: Online Shopsilencers
Slip on system for the Buell 1125r/cr, all stainless construction, supplied with all clamps weighs 3.6kg/7.9lbs, performance gains up to 15% dependent on state of bike, tune etc tuning recommended for this item *made to order*
Buell S1 Race Header
Reference: S1HEADER
£430.00
Category: Online Shopheaders
recreation of the Buell s1 race header, mandrel bent 304 stainless, fully tig welded and argon purged 2.5" inlet into silencer *made to order*
£35.00
Category: Online Shopdownpipes
2" link pipe to fit all Buell tube frame models
Buell tube frame race can
Reference: BUELLTUBCAN
£250.00
Category: Online Shopsilencers
race can for the tube frame buell models, can be made with either 2" inlet or 2.5" inlet * this product is made to order*
Buell tube frame race shoe
Reference: RACESHOE
£25.00
Category: Online Shopparts
Race shoe designed for all tube frame models, This is an exact recreation of the obsolete race shoe
£430.00
Category: Online Shopheaders
Race header for Buell X1/M2 models, recreation of the original buell race header design, mandrel bent 304 stainless, fully tig welded and argon purged. 2.5" inlet into silencer *made to order* please state model when ordering
Buell Xb header
Reference: XBHEADER
£430.00
Category: Online Shopheaders
Equal length headers to fit Buell Xb models, mandrel bent 304 stainless 1 3/4" dia, fully tig welded and argon purged, slip on collector, can also be made in titanium or Inconel, please ask for pricing. *please state model year when ordering* **made to order**
£385.00
Category: Online Shopsilencers
Oval single exit silencer to fit all years of Buell xb models, will fit using existing clamps and straps, 304 stainless, single 2.5" dia slash cut outlet, baffles can be supplied at extra cost, please enquire when ordering. please state model year on ordering. * made to order*
£450.00
Category: Online Shopsilencers
Oval twin exit silencer to fit all years of Buell xb models, will fit using existing clamps and straps, 304 stainless, twin 2.5" dia slash cut outlet, baffles can be supplied too at extra cost, please enquire when ordering. please state model year on ordering. * made to order*
Buell Xb Twin round silencer
Reference: XBTWINRD
£480.00
Category: Online Shopsilencers
Twin round twin exit silencer to fit all years of Buell xb models, will fit using existing clamps and straps, 304 stainless, twin 2.5" dia slash cut outlet, baffles can be supplied at extra cost, please enquire when ordering. please state model year on ordering. please note this product does ...
£450.00
Category: Online Shopsilencers
Race slip on exhaust for the Ebr 1190rx, made with larger bore merged collector for improved gas flow and repackable end can, marked race use only, specific ecm available either direct from Ids or through Aph, please enquire
£385.00
Category: Online Shopsilencers
Single exit oval slip on system for Ebr 1190 rx model , There is a specific ecm tune available for this exhaust either direct from ids or through Aph, please enquire, pc5 tune also available, weighs 3.6kg/7.92lbs, saving a massive 8.4kg/18.5lbs over stock, all tig welded304 stainless , supplied wi...
Ebr 1190 rx twin exit slip on
Reference: 1190RXTWIN
£440.00
Category: Online Shopsilencers
Twin exit slip on system to fit Ebr 1190 rx comes with brackets for rx belly pan, supplied with clamps. weight 5kg/11lbs, saving 7kg/15.4lbs over stock, There is a specific ecm tune available for this exhaust either direct from ids or through Aph, please enquire, pc5 tune also available,
Ebr 1190 Rx/Sx full system
Reference: EBRFULLSYS
£1,095.00
Full system designed primarily for the rx but will also fit sx, consists of oval front header, two peice rear header with ceramic coating, merged collector, repackable silencer with mounting hardware. brackets for rx bellypan. all tig welded and argon purged. The Best quality aftermarket syste...
£250.00
Category: Online Shopparts
Pre programmed ecm for all Aph exhaust systems. Designed for bikes with standard 44 toth and above gearing
£250.00
Category: Online Shopparts
Pre programmed ecm for all Aph exhaust systems. Designed for bikes with standard factory gearing